The principle of operation

The Quick-Pig pig trap is designed in such a sophisticated way that working with the pig trap is easy. All functional parts can be easily removed and the pig can be quickly brought into position. The few operating elements facilitate the pigging process and their operation is virtually self-explanatory.

In general, the development of the Quick-Pig pigging station focused on the aspect of the most efficient and ergonomic operation possible. In addition to the normal use with pig transmitter, there is also a version with rinse connection, which opens up further options for the pigging process.

The operating principle

Schacht zur Quick-Pig

Safety

The safety when pigging with the Quick-Pig trap increases many times over. A descent into a narrow, dirty, poorly ventilated and exposed shaft with its many potential dangers becomes superfluous. With the Quick-Pig trap we have lifted the working area to the top of the road and all work steps can be carried out from here. This means that accidents caused by gas are a thing of the past.

Solution with one Quick-Pig station

ein-schleusen-loesung

Solution with two Quick-Pig stations

zwei-schleusen-loesung

Backward pigging optional with Storz-coupler

rueckwaertsmolchen

The bayonet lock gets the turn

All inserts can be rotated 360°
All inserts can be rotated 360° for pigging in both directions
Bayonet lock in locked position
Bayonet lock in locked position with attached hydrant key (C32)
Lock released
Lock released Arrow marking points in flow direction. The marking shows green.
Molchschleuse in Berlin integriert

Economics

With the Quick-Pig  trap you save right from the start. Because with the Quick-Pig you do not need a large shaft construction with a correspondingly complex bedding. The pig trap is simply integrated into the pipeline system and the dome is guided just below the road surface, where it is covered by a manhole cover.

And you save even more with the periodic pigging of the pipeline! There is no need to pump water out of the shaft if necessary, and gas measurement in the shaft structure is not necessary either, as work is carried out exclusively from the top edge of the terrain. And that saves a lot of time and therefore the costs for pigging are lower than with conventional solutions

The pipe

leitung

Features of the flushing connection

The components

The pig lock Quick-Pig is so well designed that it is easy to work with. In this way, all functional parts can be removed easily and the pig is quickly positioned!
Molchschleuse im Rohrleitungneubau integriert

Questions & answers

Here you will find general questions about the Quick-Pig. To help you quickly find the information you need, we have grouped the questions into three subject areas.
FAQ

Installed Quick-Pigs

Since August 2014 over 80 pigging stations have been installed. Use the map to find the nearest Quick-Pig station to you.

Request your individual Quick-Pig now!

With the help of our product finder, you can configure your individual pig lock in just three steps!
Productfinder